hlavička

TER CESKA s.r.o.

Products and solutions TER, radio remote controls Magnetek for lifting handling and safety.

Receiver Magnetek CAN-2

Receiver Magnetek CAN-2

Magnetek’s CAN-2 receiver makes adding remote control to any CAN-BUS controlled machinery simple and easy.
This receiver allows you to tap on to most CAN-BUS systems supporting a variety of CAN protocols. The small compact design is rugged enough to handle outdoor environments, and the quick response allows for precise control, without the latency found in other radio control systems.
The CAN-2 has two digital STOP outputs, and 2 CAN-BUS ports.
You never have to worry about interference with the choice of 433MHz or 2.4GHz RF bands.
CAN-2 is compatible with a variety of Magnetek’s versatile transmitters.

  • Designed for outdoor use
  • Small, rugged compact design
  • Industry standard connector.
  • Two-way feedback.

Features

  • Working ange: 100 m nebo 500 m
  • Frequency: 433 MHz or 2,4 GHz
  • Working temperature: -40°C/+85°C
  • Degree of protection: IP66
  • Cover material: Nylon 6/6
  • Input voltage: 12÷24 V DC (9÷36 V DC max.) / < 1 W
  • Dimensions: 144×117×36 mm
  • Certification: CE

Inputs, Outputs

  • 2 CAN-BUS lines supporting J1939, CANOpen, Parker ICP, ...
  • 2 STOP (digital outputs 6 Amps / 36 V DC).
  • External or internal antenna

Expansion Module with CAN-BUS 2.0 input and outputs for direct control of hydraulic valves.

Features

  • Storage temperature: -40°C/+85°C
  • Working temperature: -40°C/+75°C
  • Degree of protection: IP67
  • Power supply: 9÷36 V DC / 32 A sourcing / 7 A sinking
  • Dimensions: 158×142×52 mm
  • Weight: 0,4 kg
  • Certification: CE

Inputs, Outputs

  • 2 individually keyed Deutsch ® DTM 12 pins connectors.
  • 1 input CAN-BUS 2.0 (J1939, Parker ICP)
  • 16 outputs
  • 10 universal (PWMOUT/DOUT/PVGOUT) that are user defined as either:
    Digital: (3 A), configurable as source or sink
    PWM (30 to 4000 Hz), configurable as open or closed loop with current control
    Analog voltage: open loop PWM at 4000 Hz
    Any PWMOUT/DOUT/PVGOUT can be used to provide reference power to one PVG valve
  • 4 digital (DOUT) (3 A)
  • 2 digital/PVG power supply (DOUT/PVG power supply), 3 A, user configurable (One DOUT/PVG power supply will power up to three PVG valves)

Set of 2 CAN-2 Receivers for wireless transmission of 2 CAN-BUS lines.

CAN-2
Receiver CAN-2
Sauer-Danfoss PLUS+1
Sauer-Danfoss PLUS+1
WIC-2402
WIC-2402

Home Download E-shop Site map Contacts

Products in category

Radio remote controls

Flex EX
Flex EX
Flex Mini
Flex Mini
Flex Pro
Flex Pro
Flex VUE
Flex VUE
MLTX2
MLTX2
XLTX
XLTX
Flex M
Flex M
MHR
MHR
WIC-2402
WIC-2402
Tau-Joy
Tau-Joy

© TER CESKA