hlavička

TER CESKA s.r.o.

Products and solutions TER, radio remote controls Magnetek for lifting handling and safety.

Rotary limit switch GF4C

Rotary limit switch GF4C
  • fully customizable
  • available switches: 1NC or 1NC+1NO, with positive mechanical contact opening, snap or slow action
  • available with the same or different revolution ration on the two motion entries
  • available with potentiometer or encoder
  • available with front fixing flange

The rotary limit switch GF4C is used to control the movement of industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as a contactor or PLC. Suitable for heavy duty, its shaft is connected to the motor and, after a set number of revolutions, the cams operate the switches, thus starting the predetermined movement. A worm gear and a helical toothed gear combined with one or more pairs of straight toothed gears are used for the transmission of the movement from the input shaft to the output shaft.
Revolution ratios, ranging from 1:1 to 1:969, result from the use of different combinations of gear wheels between the input shaft and the output shaft, which is connected to the cams operating the switches.
Each output of the limit switch can be set with a different revolution ratio to allow for a diversified control of the machinery to meet special requirements.
Transmission and gear driving shafts are made of stainless steel to prevent oxidation and wear.
The gear wheels and the driving bushes are made of self-lubricating thermoplastic material, suitably chosen to reduce the wear to a minimum and to maintain the accuracy of the couplings over time.
Sintered bronze bushes are moulded into the base of the limit switch to optimise the shaft rotation and to prevent rubbing with plastic material. Materials and components are wear resistant and protect the equipment against water and dust.
Each cam can be set with great accuracy thanks to the cam adjusting screws. The auxiliary switches are of a positive opening type. It is available with direct control switches for operating directly on the motor.
The cam-switch sets can be substituted for potentiometers suitable for the connection to electronic equipment.
The limit switch is available with a flange for direct coupling to the motor and it can be customised with labels and colours according to the customer’s requirements.

GF4C is an electromechanical device for low-voltage control circuits (EN 60947-1, EN 60947-5-1) to be used as electrical equipment of machines (EN 60204-1) in compliance with the fundamental requirements of the Low Voltage Directive 2006/95/CE and of the Machine Directive 2006/42/CE.

  • Conformity to EU Directives: 2006/95/CE, 2006/42/CE
  • Conformity to standards: EN 60204-1, EN 60947-1, EN 60947-5-1, EN 60529
  • Storage temperature: -40°C/+70°C
  • Operating temperature: -25°C/+70°C
  • Degree of protection: IP65
  • Insulation category: Class II
  • Maximum rotation speed: 800 rpm
  • Cable entry: cable clamp M20
  • Working position: any
  • Gear ratio: 1:1 ÷ 1:969
  • Certification: CE

Switches

  • Type: PRSL0036XX - 1NC + 1NO, snap
  • Type: PRSL0037XX - 1NC, slow
  • Utilisation category: AC 15
  • Rated operational current: 3 A
  • Rated operational voltage: 250 V AC
  • Rated thermal current: 10 A
  • Rated insulation voltage: 300 V AC
  • Mechanical life: 1 000 000 operations
  • Connections: screw-type terminals, EN50013
  • Wires: 1×2,5mm², 2×1,5 mm²
  • Tightening torque: 0,8Nm
  • Certification: CE
Rotary limit switch GF4C
Detail
Rotary limit switch GF4C
Description
Rotary limit switch GF4C
Dimensions

Home Download E-shop Site map Contacts

Products in category

Rotary limit switches

Base
Base

Limitex AG
Limitex AG
Fox
Fox
Oscar
Oscar
Top
Top
PF2C
PF2C

© TER CESKA