hlavička

TER CESKA s.r.o.

Products and solutions TER, radio remote controls Magnetek for lifting handling and safety.

Radio remote control Tau-Joy

Radio remote control Tau-Joy Receiver Tau-Joy
  • Up to 3 joysticks with 4 or 6 steps in each direction or proportional output. Possibility of mutual combination both types of output. Optional pushbutton in the joysticks head. Up to 9 control elements (buttons, selector switches, key selector switches, potentiometers), emergency STOP mushroom pushbutton and main switch.
  • Responding time: < 50 ms
  • Active emergency responding time: < 50 ms
  • Passive emergency responding time: 1900 ms
  • Operating range frequency: 434,050 - 434,775 MHz or 868,000 - 870,000 MHz
  • Possibility of manual selection the working channel.
  • Operating range distance: 90 m
  • Certification: CE
  • In conformity with EU directives: 98/37/CE, 99/05/CEE
  • In conformity with standards: EN 954-1, EN 60204-32, EN 13557, EN 60215, EN 60215/A2, EN 301 489-3 v1.4.1, EN 300 220-3 v.1.1.1
  • Package contents: transmitter, receiver, battery charger, 2 pcs. batteries, textile belt for transmitter, support holder with screws, connector

Radio remote control Tau-Joy is ideal for the remote control of building and industrial cranes, bridge cranes and all electro-mechanical machinery. It provides greater safety, as it enables the operator to be optimally located in the hardest working conditions. Greater profitability is also achieved, saving in time and staff. Its exclusive design combines strength, class and easy-handling incorporating the latest technology. One of its advantages is that several manoeuvres can be carried out simultaneously.
Tau-Joy can have up to 3 joysticks with digital or proportional voltage output and up to 9 next control elements (buttons, selector switches, key selector switches, potentiometers).
Receiver is placed in a special holder that can be fastened with screws, or with the strap. Magnetic mount is available by order. Internal whip antenna is brought out below, the external antenna is available by order. 6 LEDs shows the system state.
All connections are placed in the 48-pin connector, which wiring is glued-on inside of the cover.
24 relay is put on the slots of the base board and allows easy replacement. 2 relays are for STOP function, one for START and 21 relays for control. On request can be installed a extended card with 8 relays or up to 8 analogical voltage outputs.
Integral part is the charger with battery check function and automatic switch off after charging.

Tau-Joy can have next 3 operation configurations depending on each application:

  • MASTER / SLAVE: 2 transmitters controls 2 receivers
  • PITCH & CATCH: 2 transmitters controls 1 receiver
  • TANDEM: 1 transmitter control 2 receivers

Due to the configuration options, there are no standard variants and for ordering always use the request form.

  • Channel spacing: 25 kHz
  • Modulation: FM
  • RF power output: 10 mW A.R.P.
  • Coding key: FFSK
  • Transmitting power consumption: < 80 mA
  • Standby power consumption: < 0,8 mA
  • Operating working time: 11 hours + 10 minutes after low battery LED flashes
  • Auto power off after about 4.5 minutes of inactivity (configurable) for longer battery life and release the radio channel.
  • Battery capacity and type: removable battery NiMH 7,2 V, 1500 mAh
  • Battery weight: 0,2 kg
  • Operating temperature: -10°C/+55°C
  • Casing material: polyamid 6-6 reinforced with 15% fibreglass
  • Dimensions: 272×167×142 mm
  • Transmitter weight (without battery): 1,5 kg
  • Degree of protection: IP65
  • Joysticks: dual-axis joysticks with possibility 2 types of output incl. mutual combination
    fully proportional, analogical step-less output
    up to 6 step digital output
    possibility of pushbutton in the joysticks head
  • Optical indication: transmission indicator and low battery on separate LEDs
  • Battery charging time: 8 hours
  • RF sensitivity: 0,3 μV
  • Antenna: internal (standard), external (on request)
  • Number of relays:
    21 or 29 + START + 2 STOP relays
    21 + START + 2 STOP relays (with analogical output)
  • Relays:
    5 A at 250 V AC or 30 V DC and resistive load
    2 A at 250 V AC or 30 V DC a inductive load cosφ=0,4
  • Analogical output (8 max.): voltage output with the following output values:
    bipolar: -5 ÷ +5 V or -10 ÷ +10 V
    unipolar: 2/4/6 V, 3/6/9 V, 6/12/18 V
    adjusted for hydraulic valves Sauer-Danfoss
    Possibility to change the output values. The range of values is always less than the supply voltage.
  • Power supply: 24 V DC, 24 V AC/48 V DC, 48/115/230 V AC (±15%) in accordance with EN 60047-5-1, 12 VDC on request
  • Maximum consumption: 0,9 A (48 V AC), 0,5 A (115 V AC), 0,2A (230 V AC)
  • Optical indication: by means 6 LEDs
  • Wiring: connector 48-pin
  • Dimensions: 374×274×126 (216) mm (with fastening)
  • Fuses: 7,5 A for Emergency STOP function
  • Weight (with fastening): 4,20 kg
  • Degree of protection: IP65
  • Fastening: 3 mm bichromatic steel support holder with nut bolts or magnets (on request)
Radio remote control Tau-Joy
Description
Radio remote control Tau-Joy
Dimensions
Radio remote control Tau-Joy
Transmitter Tau-Joy
Receiver Tau-Joy
Receiver Tau-Joy
Holder Tau-Joy
Holder Tau-Joy
Connector wiring
Receiver connector wiring

Home Download E-shop Site map Contacts

Products in category

Radio remote controls

Flex EX
Flex EX
Flex Mini
Flex Mini
Flex Pro
Flex Pro
Flex VUE
Flex VUE
MLTX2
MLTX2
XLTX
XLTX
Flex M
Flex M
MHR
MHR
CAN-2
CAN-2
WIC-2402
WIC-2402

© TER CESKA